Kamptee, Nagpur, Maharashtra
- GST NO. : 27AAHCM3276C1ZJ
Pipe Flanges
The flanges are the second most used joining method after welding. They are used when joints need dismantling. It provides flexibility for maintenance. Flange Connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance is required during plant operation.
| Business Type | Manufacturer, Supplier, Retailer, Wholesaler |
| Thickness | 10-20mm |
| Outer Diameter | 30-50mm |
| Inner Diameter | 10-20mm |
| Temperature | 50-100 ℃ |
| No. of Holes | 4-8 Holes |
| Specialities | Rust Proof, Perfect Shape, High Strength |
Preferred Buyer From
| Location | Anywhere in India |
Details :
- The blind flange is a blank disc with a bolt hole. These types of flanges are used with another type of flange to isolate the piping system or to terminate the piping as an end. Blind flanges are also used as a manhole cover in the vessel.
- We are the manufacturer and supplier of above mentioned Flanges up 300 NB of TABLE "H", 150#, and 300# respectively.
| Business Type | Manufacturer, Supplier, Retailer, Wholesaler |
| Thickness | 10-20mm |
| Finishing | Polished |
| Inner Diameter | 10-20mm |
| Temperature | 0-50 ℃ |
| Unit Length | 6-12m |
| No. of Holes | 4-8 Holes |
| Specialities | Rust Proof, Perfect Shape, Fine Quality |
Preferred Buyer From
| Location | Anywhere in India |
Slip-On flange has a hole with matching outside diameter of pipe from which pipe can pass. The flange is placed on pipe and fillet welded from both inside and outside. Slip-On Flange is suitable for low pressure and temperature application.This type of flange available in large size also
| Business Type | Manufacturer, Supplier, Retailer, Wholesaler |
| Material | Stainless Steel |
| Diameter | 10-20mm |
| Shape | Round |
| Thickness | 10-20mm |
| Feature | Corrosion Proof, Fine Finishing, High Strength |
| Finishing | Polished |
Preferred Buyer From
| Location | Anywhere in India |
socket-weld flanges has a female socket in which the pipe is fitted. fillet welding is done from outside on the pipe. generally, it is used in small bore piping and only suitable for low pressure and temperature application.
